Dell POWEREDGE M1000E - Manual (Page 249)

Dell Converged Enhanced Ethernet Command Reference 233
53-1002115-01
rmon collection history
15
rmon collection history
Collects the periodic statistical samples of Ethernet group statistics on an interface for later
retrieval.
Synopsis rmon collection history number [buckets bucket_number | interval seconds | owner name]
no rmon collection history number
Operands number Specifies the RMON collection control index value. The range of valid values
is 1-65535.
buckets bucket_number
Specifies the maximum number of buckets for the RMON collection history.
The range of valid values is 1 to 65535.
interval seconds Specifies the alarm sample interval in seconds. The range of valid values is
1-2147483648.
owner name Specifies the identity of the owner. The maximum number of characters is 32.
Defaults The collection of RMON history is not enabled.
Command
Modes
Interface configuration mode
Description Use this command to collect Ethernet group statistics on an interface. Use the no rmon collection
history command to disable the history.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To collect RMON statistics for the owner admin on 10 Gbps Ethernet interface 0/1:
switch(config)#interface intengigabitethernet 0/1
switch(conf-if-te-0/1)#rmon collection history 5
See Also show rmon history