System-name – Dell POWEREDGE M1000E User Manual
Page 136
Advertising
120
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
system-name
6
system-name
Sets the global system name specific to LLDP.
Synopsis
system-name name
Operands
name
Specifies a system name for the LLDP. The valid values is a maximum of32
characters.
Defaults
By default, the host name from the switch is used.
Command
Modes
Protocol LLDP configuration mode
Description
Use this command to set the global system name specific to LLDP.
Usage
Guidelines
There are no usage guidelines for this command.
Examples
To specify a system name for the LLDP:
switch(conf-lldp)#system-name Dell
See Also
system-description
Advertising