Dell POWEREDGE M1000E - Manual (Page 210)

194 Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
spanning-tree restricted-tcn
11
spanning-tree restricted-tcn
Restricts the topology change notification Bridge Protocol Data Units (BPDUs) sent on the port.
Synopsis spanning-tree restricted-tcn
no spanning-tree restricted-tcn
Operands none
Defaults The restricted TCN is disabled.
Command
Modes
Interface configuration mode
Description Use this command to restrict the topology change notification Bridge Protocol Data Units (BPDUs)
sent on the port.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To restrict the TCN on a specific interface:
switch(conf-if-te-0/1)#spanning-tree restricted-tcn
See Also show spanning-tree