Show sflow – Dell POWEREDGE M1000E User Manual
Page 240
224
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
show sflow
13
show sflow
Displays sFlow configuration information and statistics.
Synopsis
show sflow
Operands
none
Defaults
By default, sFlow is disabled on all interfaces.
Command
Modes
EXEC mode
Description
Use this command to display sFlow configuration information and statistics.
Usage
Guidelines
There are no usage guidelines for this command.
Examples
To display sFlow statistics:
switch#show sflow
sFlow services are enabled
Global default sampling rate: 32768
Global default counter polling interval: 20
1 collectors configured
Collector IP addr: 172.21.162.51, Agent IP addr: 10.32.152.22, UDP port: 6343
77 UDP packets exported
0 UDP packets dropped
165 sFlow samples collect
See Also
show sflow interface