Dot1x timeout re-authperiod – Dell POWEREDGE M1000E User Manual
Page 292
276
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
dot1x timeout re-authperiod
17
dot1x timeout re-authperiod
Sets the number of seconds between reauthorization attempts.
Synopsis
dot1x timeout re-authperiod seconds
Operands
seconds
Specifies the seconds between reauthorization attempts. The range of valid
values is 1-4294967295.
Defaults
The default time is 3600 seconds.
Command
Modes
Interface configuration mode
Description
Use this command to set the number of seconds between reauthorization attempts.
Usage
Guidelines
There are no usage guidelines for this command.
Examples
To set 25 seconds as the amount of time between reauthorization attempts:
switch(config)#interface extengigabitethernet 0/16
switch(conf-if-te-0/16)#dot1x timeout re-authperiod 25
See Also
none