Dell POWEREDGE M1000E - Manual (Page 31)

Dell Converged Enhanced Ethernet Command Reference 15
53-1002115-01
exit
2
exit
Exits the current mode and returns to the previous mode.
Synopsis exit
Operands none
Defaults There are no default configurations for this command.
Command
Modes
All command modes
Description Use this command to exit the current mode, and return to the previous mode. When used in EXEC
and Privileged EXEC modes, the exit command terminates the session.
Usage
Guidelines
There are no usage guidelines for this command.
Examples To exit the Interface configuration mode, and return to the Configuration mode:
switch(config)#interface intengigabitethernet 0/0
switch(conf-if-te-0/0)#exit
switch(config)#exit
See Also end, enable, disable