Show lacp counter – Dell POWEREDGE M1000E User Manual
Page 146
130
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
show lacp counter
7
show lacp counter
Displays the Link Aggregation Control Protocol (LACP) counters on all port-channels or a specified
interface.
Synopsis
show lacp counter number
Operands
number
Specifies the port-channel number to display. The range of valid values is
1-63.
Defaults
There are no default configurations for this command.
Command
Modes
EXEC mode
Description
Use this command to display the LACP packet counters on all interfaces that belong to a
port-channel or a specific interface.
Usage
Guidelines
There are no usage guidelines for this command.
Examples
To show the LACP counters for port-channel 10:
switch#show lacp counter 10
% Traffic statistics
Port LACPDUs Marker Pckt err
Sent Recv Sent Recv Sent Recv
% Aggregator Po 10 1000000
Te 0/1
65
0
0
0
0
0
Te 0/2
64
0
0
0
0
0
Te 0/3
64
0
0
0
0
0
Te
0/4
0 0
0
0
0
0
switch#
See Also
clear lacp counters