Spanning-tree autoedge – Dell POWEREDGE M1000E User Manual
Page 200
Advertising
184
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
spanning-tree autoedge
11
spanning-tree autoedge
Enables automatic edge detection.
Synopsis
spanning-tree autoedge
no spanning-tree autoedge
Operands
none
Defaults
Auto detection is not enabled.
Command
Modes
Interface configuration mode
Description
Use this command to automatically identify the edge port.
Usage
Guidelines
The port can become an edge port if no Bridge Protocol Data Unit (BPDU) is received.
Examples
To enable automatic edge detection:
switch(conf-if-te-0/1)#spanning-tree autoedge
See Also
protocol spanning-tree
Advertising