Show line – Dell POWEREDGE M1000E User Manual
Page 45
Dell Converged Enhanced Ethernet Command Reference
29
53-1002115-01
show line
2
show line
Displays line parameters.
Synopsis
show line [first line number| last line number]
Operands
first line number
Specifies the first line number. The range of valid values is 0-31.
last line number
Specifies the last line number. The range of valid values is 0-31.
Defaults
If the line is not specified, it displays all VTY and console information.
Command
Modes
Privileged EXEC mode
Description
Use this command to display line parameters.
Usage
Guidelines
There are no usage guidelines for this command.
Examples
To display line parameters:
switch#show line 10 22
Status Type Timeout(m/s) Length
Idle console 0 10:0 24
Idle vty 10 10:0 24
Idle vty 11 10:0 24
Idle vty 12 10:0 24
Idle vty 13 10:0 24
Idle vty 14 10:0 24
Idle vty 15 10:0 24
Idle vty 16 10:0 24
Idle vty 17 10:0 24
Idle vty 18 10:0 24
Idle vty 19 10:0 24
Idle vty 20 10:0 24
Idle vty 21 10:0 24
Idle vty 22 121:1212 24
switch#show line 0
Status Type Timeout(m/s) Length
Idle console 0 10:0 24
* Active vty 0 10:0 24
See Also
line vty, line console, exec-timeout