Dell POWEREDGE M1000E - Manual (Page 234)

218 Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
sflow enable
13
sflow enable
Enables sFlow globally.
Synopsis sflow enable
no sflow enable
Operands none
Defaults By default, sFlow is disabled on the system.
Command
Modes
Global configuration mode
Description Use this command to enable sFlow globally.
Use the no sflow enable command to disable sFlow globally.
Usage
Guidelines
This command is supported on physical ports and Link Aggregation Group (LAG) ports.
Examples To enable sFlow globally:
switch(config)#sflow enable
See Also sflow enable interface