Dell POWEREDGE M1000E - Manual (Page 97)

Dell Converged Enhanced Ethernet Command Reference 81
53-1002115-01
debug arp
5
debug arp
Displays the ARP traffic.
Synopsis debug arp [interface interface-type interface-number] {[count tx | rx]}
Operands interface Displays the ARP traffic for the specified interface only.
interface-type Network interface type (external TenGigabitEthernet interface, null,
port-channel, or VLAN).
interface-number
Layer-2 or layer-3 Interface number.
count Stops display after display count packets.
tx Counts only transmitted packets.
rx Counts only received packets.
Description Use this command to display the ARP traffic, for all interfaces or a specific interface.
Defaults There are no default configurations for this command.
Command
Modes
EXEC mode
User Guidelines There are no usage guidelines for this command.
Example none
See Also none