Vlan classifier group – Dell POWEREDGE M1000E User Manual

Page 73

Advertising

Dell Converged Enhanced Ethernet Command Reference

53-1002115-01

vlan classifier group

Adds and deletes rules to a VLAN classifier group.

Synopsis

vlan classifier group number [add rule number| delete rule number]

no vlan classifier group

Operands

number

Specifies the VLAN group number for which rules are to be added or deleted.
The range of valid values is 1-16.

add rule number

Specifies a rule is to be added. The range of valid values is 1-256.

delete rule number Specifies a rule is to be deleted. The range of valid values is 1-256.

Defaults

There are no default configurations for this command.

Command

Modes

Global configuration mode

Description

Use this command to add and delete rules from VLAN classifier groups.

Usage

Guidelines

There are no usage guidelines for this command.

Make sure your converged mode interface is not configured to classify untagged packets to the
same VLAN as the incoming VLAN-tagged packets. By configuring a converged interface to classify
untagged packets (by using classifiers or the default port vlan_id) to the same VLAN as
VLAN-tagged packets coming into the interface, the FCoE hardware sends out untagged packets to
the CNA. These packets may be dropped, disrupting communications.

Examples

To add rule 1 to VLAN classifier group 1:

switch(config)#vlan classifier group 1 add rule 1