Dell POWEREDGE M1000E - Manual (Page 72)

56 Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
vlan classifier activate group
3
vlan classifier activate group
Activates a VLAN classifier group.
Synopsis vlan classifier activate group number vlan vlan_id
no vlan classifier activate group
Operands number Specifies which VLAN classifier group to activate. The range of valid values is
1-16.
vlan vlan_id Specifies which VLAN interface to activate. The range of valid values is
1-3583.
Defaults There are no default configurations for this command.
Command
Modes
Interface configuration mode
Description Use this command to activate a VLAN classifier group for a specified VLAN. Use the no vlan
classifier activate group command to remove the specified group.
Usage
Guidelines
A VLAN classifier cannot be added to the FCoE VLAN.
Examples To activate VLAN classifier group 1 for VLAN 5:
switch-cmsh(conf-if-te-0/10)#vlan classifier activate group 1 vlan 5
See Also none