Dot1x timeout server-timeout – Dell POWEREDGE M1000E User Manual
Page 293

Dell Converged Enhanced Ethernet Command Reference
277
53-1002115-01
dot1x timeout server-timeout
17
dot1x timeout server-timeout
Sets the authentication sever response timeout.
Synopsis
dot1x timeout server-timeout seconds
Operands
seconds
Specifies the number of seconds that a switch waits for the transmission of
packets by the switch to the authentication server. The range of valid values
is 1-65535.
Defaults
The default timeout is 30 seconds.
Command
Modes
Interface configuration mode
Description
Use this command to set the authentication sever response timeout.
Usage
Guidelines
There are no usage guidelines for this command.
Examples
To set 40 seconds as the switch-to-authentication server transmission time:
switch(config)#interface extengigabitethernet 0/16
switch(conf-if-te-0/16)#dot1x timeout server-timeout 40
See Also
none