Leica Geosystems Leica 3D Disto - Manual - Manual (Page 100)

3D Disto, Operation 100
Addition and
subtraction after
measurement
step-by-step 1. Select element by fingertip, stylus or / .
2. Press or for addition or subtraction. The corresponding symbol appears
in the status bar. The first selected line or area is highlighted with black bullet
symbol.
3. Select next element and press or for addition/subtraction again or to
close the sum and/or finish the adding/subtracting function.
4. The added/subtracted
elements get a or
icon.
5. The sum is displayed in
the results window.