Leica Geosystems Leica 3D Disto - Manual - Manual (Page 141)

141 3D Disto, Software Applications
Point-Shift Tool The Point Shift tool creates a new point by providing lateral movement value along
an existing line, offset and offset angle.

Point-Shift location is computed two-dimensionally in the X-Y plane. New point
height is computed by extrapolation of the selected line.
1. Target and measure two points or select an existing line. Activate the CAD tools
by a long tap on the line in the sketch area. Select Point Shift.
2. Assistant and pop-up ask for the length movement.
Press OK. Enter a value and press OK.