Leica Geosystems Leica 3D Disto - Manual User Manual
Page 176
Advertising
![background image](/manuals/651590/176/background.png)
3D Disto, Check & Adjust
176
Adjustment
step-by-step
6. If both measurements were successful, a pop-up appears with Set new:
XXX gon, Reset to factory default, or Cancel calibration.
7. Choose Set... or Reset... to adjust V-index. Final pop-up asks Are you sure?
Yes/Cancel.
8. If Yes, checkmark is displayed to confirm parameters were set successfully.
1. Set up the 3D Disto close to a wall with a steep target of
good visibility that is at least 15 m above the instrument.
2. Press
.
3. Viewfinder opens. Target as precisely as possible.
Press
.
4. 3D Disto turns to second face automatically.
5. Target a second time. Press
.
3D Disto_051
Advertising