Leica Geosystems Leica 3D Disto - Manual - Manual (Page 46)

3D Disto, Description of the System 46
2. If the Control Unit does not recognise the PC connection automatically
press or connect in the Menu settings.
3. If the connection works, start the internet browser and go to the MyWorld
homepage. Register your product by entering the equipment number.
4. Go to the MyProduct page, choose the Software tab and press Software
Update key. MyWorld automatically checks the firmware version on the Control
Unit and starts the download in case an update is needed. The process is a step-
by-step wizard guided process.
5. Disconnect the Control Unit from the PC and start the installation in Menu »
Device » Software » Update.
Variations in 3D Disto Windows Software
1. Start your internet browser and go to the MyWorld homepage. Register your
product by entering the equipment number.
2. Choose the MyProduct page, choose the latest software version and press the
Download key.
3. Save the file in the Update folder in the directory My Documents\Leica
Geosystems\3D Disto and start the installation in Menu\Device\Software,
Update.