Leica Geosystems Leica 3D Disto - Manual - Manual (Page 76)

3D Disto, Instrument Setup 76
5.4.4 Data Transfer

Other USB memory sticks may be used, but Leica Geosystems recommends Leica
industrial grade USB memory sticks and cannot be held responsible for data loss or
any other error that may occur when using a non-Leica USB memory stick.
Data import It is possible to import DXF files or table formats for some applications. Data should
be prepared on the PC before importing. Only points are imported, no lines. The data
source can be a PC or a USB stick plugged into the Control Unit.

Remove irrelevant data such as frames, logos, coordinates, or orientation
arrows in the DXF files before importing them.