Leica Geosystems Leica 3D Disto - Manual - Manual (Page 61)

61 3D Disto, Instrument Setup
6. Turn the Control Unit ON by pressing .
8. Choose language.
Choose time format (23:59/11:59 am-pm).
Enter date and time.
Choose units for slope, distance, and angle.
Choose decimal separator.
9. Press to continue.

Do not move the 3D Disto while self-levelling procedure is running.
7. If the Control Unit is
started for the first
time the following
screen opens:

Press to shut
down the Control
Unit.