Leica Geosystems Leica 3D Disto - Manual - Manual (Page 93)

93 3D Disto, Operation
4. Press to measure. Measured point appears in the sketch area.

Measurement errors can occur when measuring toward clear liquids,
for example water, or dust free glass, Styrofoam, or similar semi-
permeable surfaces. Measurement time may increase when measuring
to non-reflective and dark surfaces.

The position of the 3D Disto symbol in the sketch changes in correct
relation to the measured point. The first measured point is always
displayed on the left side of the sketch area.
5. Target the second
point and proceed as
described in steps 3. to
4. A line is displayed
from the first to the
second measured
point.