1 horizontal areas/volumes, Horizontal areas/volumes – Leica Geosystems Leica 3D Disto - Manual User Manual
Page 103
103
3D Disto, Operation
6.6.1
Horizontal Areas/Volumes
Calculation during
measurement
step-by-step
1. Either select start point in sketch area or open Viewfinder if sketch is empty.
2. Target and measure a point with
. Viewfinder is closed and point displayed
in sketch.
3. Press
and measure next point with
.
4. Press
to define line as part of the area. Proceed with measurement and line
selection. The polygon can be closed by pressing
. The area is highlighted in
grey.
5. Pop-up appears to choose between the different options to define the height:
Enter height for volume, Measure height, Close List.
6. Measure height:
Viewfinder opens, target and measure point on floor with
, followed by
point on ceiling. The height appears in the results window.
OR:
7. Enter height:
Default for the entry is 0.000 m. Enter a desired value and press OK or Cancel.
You can measure the points anywhere on the floor or ceiling area.