10 instrument protection (theft protection) – Leica Geosystems Leica 3D Disto - Manual User Manual
Page 180
Advertising
![background image](/manuals/651590/180/background.png)
3D Disto, Instrument Protection (Theft Protection)
180
10
Instrument Protection (Theft Protection)
Description
The instrument can be protected by a Personal Identification Number. If the PIN
protection is activated, the Control Unit will always prompt for a PIN code entry after
starting up. If the wrong PIN was entered three times, a PUK is required, which can
be found on the instrument delivery papers. If the PUK code was entered correctly,
the PIN code is set to default value "0" and the PIN protection is deactivated.
Contact your Leica Geosystems representative if you need a replacement PUK.
Advertising