Leica Geosystems Leica 3D Disto - Manual User Manual
Page 92
Advertising
![background image](/manuals/651590/92/background.png)
3D Disto, Operation
92
To measure for example a room's dimension, carry out the following steps:
1. Start-up the system as described in "5.1 Start-up Procedure".
3. To target the first point, for example a corner, press
and use the arrow
keys or another method as described in "6.2 Viewfinder", to move the laser point
to the desired position.
2. The following screen
appears:
While targeting ensure the laser beam is not split along corners or
edges. Otherwise this could lead to wrong measurements.
If laser point becomes a line due to an acute target angle to a wall the
system measures with the centre of the line.
Advertising