Leica Geosystems Leica 3D Disto - Manual - Manual (Page 82)

3D Disto, Instrument Setup 82
5.4.5 Exported files
Exported files A key press on generates a package of export files for documentation purposes
or post processing:
•
scaled 2D DXF drawing for documentation and print out including project infor-
mation, all measurements and different perspectives
• DXF file 2D (X; Y), scale 1:1
• DXF file 3D (X; Y; Z), scale 1:1
• CSV file: editable, common tabular data format that lists all measurements in a
chart
• TXT file: all results in editable ASCII format. Same content like CSV file
• JPG files of photos and Secure Points

Export applies the distance unit setting to exported coordinates. This
setting can be modified any time before an export is executed.

The import/export settings in the menu allow to set the coordinates of the
first measured point of each application. This setting must be done before
the first point in a new project (e. g. a new scan) is measured; the setting
does not apply retrospectively.