Leica Geosystems Leica 3D Disto - Manual User Manual
Page 154
Advertising
3D Disto, Software Applications
154
•
Perpendicular to wall
1. 3D Disto measures the surface around the measured start point automatically.
Await the next pop-up.
3. If you choose from ... to, Viewfinder opens to measure end point before spacing
can be defined. Press
.
4. 3D Disto starts scan at the start point. Proceed as described in "Horizontal scan,
2. Pop-up prompts to define measurement direc-
tion up/from ... to/down followed by spacing
of measurement points.
Advertising