Leica Geosystems Leica 3D Disto - Manual - Manual (Page 181)

181 3D Disto, Instrument Protection (Theft Protection)
Activate PIN code
step-by-step 1. Start-up Control Unit as described in "5 Instrument Setup".
2. Go to Menu » Device » Theft Protection. Default setting is Off.
3. Press On to activate.
4. Enter your desired PIN code (3 to 8 character numeric or alpha).
5. Accept with Ok.

Now the instrument is protected against unauthorised use. The PIN code is required
now after switching on the instrument, de-activating standby, or re-entering the PIN
settings.
Deactivate PIN
code
step-by-step 1. Start-up Control Unit as described in "5 Instrument Setup".
2. Go to Menu » Device » Theft Protection.
3. Enter your PIN code and press OK to accept.
4. Press Off to deactivate.

The instrument is no longer protected against unauthorised use.