Leica Geosystems Leica 3D Disto - Manual User Manual
Page 95
Advertising
![background image](/manuals/651590/95/background.png)
95
3D Disto, Operation
9. Proceed as described previously to measure the ceiling.
10. Press
to undo the last command.
11. Press
to redo the last command.
12. Press
or
and
to clear measurements and results.
13. Press
to choose between save, save as, clear screen, close measurements
without saving.
8. To measure the room
height select a floor
point in the sketch
area. Then target and
measure the ceiling
corner above it.
Please note that the sketch shows a foot print view. Measured floor
and ceiling points may cover each other. Use
or
to select points
and results.
Advertising