Leica Geosystems Leica 3D Disto - Manual User Manual
Page 22
Advertising
![background image](/manuals/651590/22/background.png)
3D Disto, Technical Terms and Abbreviations
22
Secure Points
Secure Points link measurements to a coordinate system. These reference points
allow changing the 3D Disto’s location or continuing measurements at a later time,
so that all measurements fit together perfectly.
Refer to "7.3 Location" for more information.
1. Name and place three to five self-adhesive
target marks on walls, ceiling or floor around
your working area.
2. Measure these target marks and save them as
Secure Points.
3. Move the 3D Disto or set it up "anywhere" at
a later time.
4. Measure the Secure Points again. 3D Disto
relocates itself and measurements can be
continued.
3D Disto_026
3D Disto_027
Advertising