Leica Geosystems Leica 3D Disto - Manual - Manual (Page 104)

3D Disto, Operation 104
OR:
8. Cancel: the result is an area.
9. To change the height or to calculate the volume with a selected area press
and proceed as described in steps 3. to 4.
Calculation after
measurement
step-by-step 1. Select line to be added to area and press .
2. Proceed that way for all lines and press .
3. For volume calculations go on as described from 5. to 9., page 103.
4. Quit application by pressing .