Leica Geosystems Leica 3D Disto - Manual - Manual (Page 32)

3D Disto, Description of the System 32
Description of buttons and LEDs
Button/LEDs Description
ON/OFF button Button to turn instrument ON or OFF.
Instrument turns OFF after 15 minutes if not connected to the
Control Unit or PC.
LEDs for 3D Disto
status • Green and orange LEDs lights up continuously: 3D Disto is
booting.
• Orange LED flashes: Self-levelling procedure is running or
tilt > 3°.
• Green LED flashes: 3D Disto is ready for measurement. Tilt
sensor is on.
• Orange LED lights up continuously:
An error occurred. Refer to "8 Error Messages" for more
information.
• Green and orange LEDs light up continuously: Press the ON
Button to reset the instrument.
For experts only: Tilt sensor off
•
Green LED flashes once; orange LED three times.