3 cleaning and drying, Cleaning and drying – Leica Geosystems Leica 3D Disto - Manual User Manual
Page 184
Advertising
![background image](/manuals/651590/184/background.png)
3D Disto, Care and Transport
184
11.3
Cleaning and Drying
Lens and housing
of 3D Disto
•
Blow dust off lens and housing.
•
Never touch the glass with your fingers.
•
Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten the cloth
with water or pure alcohol. Do not use other liquids; these may attack the
polymer components.
Damp products
•
Dry the product, the transport container, the foam inserts and the accessories
at a temperature not greater than 40°C / 104°F and clean them.
•
Do not repack until everything is completely dry.
•
Always close the transport container when using in the field.
Cables and plugs
Keep plugs clean and dry. Blow away any dirt lodged in the plugs of the connecting
cables.
Advertising