Leica Geosystems Leica 3D Disto - Manual - Manual (Page 150)

3D Disto, Software Applications 150
4. Press for horizontal line scan.
5. Viewfinder opens to target and measure start point.
7. If you choose from ... to Viewfinder opens to measure scan end point.
Press .
6. Pop-up prompts to define scan direction
right/from ... to/left. Right for 360° clock-
wise, ’from ... to’ for a defined interval, left
for 360° scan counter clockwise. Choose one
of these options to continue.
8. Pop-up prompts to define spacing of the measurement.
Choose an interval and press OK or go to the rightmost
position to enter individual intervals.

For best scan results do not choose small intervals at long distances.