Leica Geosystems Leica 3D Disto - Manual User Manual
Page 94
Advertising
3D Disto, Operation
94
7. Proceed as described for measuring further points or use
to close/finish the
polygon.
6. After the third point is
measured a proposed
"closing line" appears
between the first and
last measured point.
The selected line is
always highlighted with
a bold line and an
arrow in the direction
of measurement.
In special situations the proposed line is not available. Polygons can
also be closed and results created by drawing a line with the stylus
between the two points to be connected.
Advertising