4 tilt sensor calibration, Tilt sensor calibration – Leica Geosystems Leica 3D Disto - Manual User Manual
Page 177
Advertising
![background image](/manuals/651590/177/background.png)
177
3D Disto, Check & Adjust
9.4
Tilt Sensor Calibration
Problem
A tilt sensor error has the same impact as the V-index error but is orientation-
dependent.
This can be detected when the heights or height differences of measured points
appear incorrect, for example Go to Horizon turn command or plumbing does not
work properly.
Before calibration:
After calibration:
a) Tilt sensor offset
3D Disto_033
a
3D Disto_034
Advertising