Leica Geosystems Leica 3D Disto - Manual User Manual
Page 178
Advertising
3D Disto, Check & Adjust
178
This calibration is done automatically. You must only ensure that the 3D Disto is set
up < 3°.
Adjustment
step-by-step
1. Press
.
2. 3D Disto starts self-levelling automatically: the tilt is checked and the instrument
levels itself if the tilt is < 3°. Pop-up prompts Don't touch 3D Disto about 1
minute!
3. If ok, pop-up prompts Calibration successful.
Advertising