Leica Geosystems Leica 3D Disto - Manual - Manual (Page 119)

119 3D Disto, Software Applications
Parallel Line
step-by-step 1. Start application in Menu » Applications » Tool Kit.
2. Press on the Toolbar.
3. Viewfinder opens. Target and measure start and end point of the reference line.
4. A pop-up prompts to enter parallel distance to the left or right of the reference
line. Press OK to confirm the entered value.
5. Viewfinder opens to roughly target layout point. Press . Laser point flashes
to indicate the exact position on the parallel.
6. Press to close Tool Kit.

All points have to be measured on the same surface.