Leica Geosystems Leica 3D Disto - Manual User Manual
Page 166
Advertising
![background image](/manuals/651590/166/background.png)
3D Disto, Software Applications
166
2. Laser point flashes if the exact position is found. Point is highlighted in red in
sketch area.
To layout further points select another point and press
.
3. Press
to go back to the Aligner tool.
4. Press
to save the file.
Plane Switching
If a point can not be projected on the ceiling, just move the laser beam
onto the floor before pressing the DIST key. Following points will be
projected on the floor from now on. The projection surface can be
changed at any time.
Advertising