Leica Geosystems Leica 3D Disto - Manual - Manual (Page 89)

89 3D Disto, Operation
3. Press or to zoom in and out. There are four magnifications available. The
current setting is shown in the status bar.
4. Press to adjust the brightness of the camera.
5. Press to display/hide all measured points. The selected point is always
displayed with Point ID.
6. Press to measure hidden points.
Select an offset tool in the pop-up:
• Vertical offset: Measure one point on any vertical target.
• Individual offset: Measure two points on a pole or other hardware.
• Offset ruler: Measure two points on the 3D Disto’s offset point ruler.
An assistant leads through the workflow.

The vertical offset tool is enabled until you unlock it.