Leica Geosystems Leica 3D Disto - Manual User Manual
Page 68
3D Disto, Instrument Setup
68
All settings on the setup screen can also be changed through the menu:
Choose Menu » Device.
•
Connect 3D Disto to connect by WLAN, USB cable, or disconnect Control Unit.
•
WLAN channel to switch between different channels if connection does not
work.
•
Connect PC to allow data transfer.
•
Display to change display settings.
•
Tilt sensor to activate/deactivate the tilt sensor.
•
Theft protection to protect instrument with security PIN.
•
Calibration to check and adjust. Refer to "9 Check & Adjust" for more informa-
tion.
•
Software to update software, to check software version on the Control Unit and
the 3D Disto or to enter/activate the software license key.
Choose ON when working in harsh construction environment with
many shocks and vibrations, apart from that choose ON (sensitive).