Leica Geosystems Leica 3D Disto - Manual - Manual (Page 80)

3D Disto, Instrument Setup 80
Data export Data export is started in the File Manager.
USB Cable
3. If connection is not working go to Menu Device and select Connect to PC.
4. After successful connection, a pop-up window with the Export folder appears at
your PC screen.
5. Copy the files to the PC and close the window.
6. Disconnect Control Unit by choosing Disconnect Hardware at your PC or by key
press in the pop-up of the Control Unit.

Select only files you really need to keep export time short.
1. Open File Manager, choose a folder or
file and press .
2. Press in the pop-up. Connect
powered Control Unit and PC by
Micro-USB cable.
3D Disto_011