Rs-232c interface, Items that can be set – KEYENCE LT-9001 Series User Manual
Page 111
6
Chapter
Environment
Settings
E LT-9001-IM
6-5
Performs settings for the communication specifications of the RS-232C interface.
The settings of the RS-232C interface varies depending on the devices to be
connected or the contents to be output.
Refer to "Chapter 8 RS-232C" (page 8-1) for details.
Items that can be set
Reference
RS-232C Interface
Item
Description
Baud rate
Sets the speed at which the data is transmitted.
[BAUDRATE]
Select one among 9600, 14400, 19200, 38400, 57600, and 115200 bps.
Parity check
Sets the type of the parity check. Select one among [NONE], [EVEN],
[PARITY]
and [ODD].
Stop bit
Sets the length of the stop bit. Select 1 bit or 2 bits.
[STOPBIT]
Data length
Sets the number of characters. Select 7 bits or 8 bits.
[D-LENGTH]
Data mode
Sets the mode of data transmission by synchronous output
[D-MODE]
(output of the measured value by TIMING input).
Select one among [OFF], [S0], [S1], and [S2].