KEYENCE LT-9001 Series - Manual (Page 137)

8
Chapter
RS-232C
E LT-9001-IM
8-7
Auto-zero ON/OFF
Sets or cancels the Auto-zero function. You can consecutively use the Auto-zero setting command.
Program No. change
Changes the program No. This command is active when [P-SELECT] is set to [CONSOLE] in the environment
settings.
Keylock ON/OFF
Changes ON and OFF of the keylock.
Switching measurement screen and the light intensity screen
Toggles between the measurement screen and the light intensity screen. This command has the same function
as the [SCREEN] button.
setting
setting