KEYENCE LT-9001 Series - Manual (Page 48)

3-2
Display Screens
Six types of screens are displayed in the displacement mode as shown below.
E LT-9001-IM
Operations
and
Fun
ction
Settings
in
the
Displacement
Mo
de
3
Chapter
Run mode
Program mode
<Measurement screen>
<Program change screen> <Program mode screen>
• Program change screen
You can register a set of parameter settings to
perform measurement as a program. The registered
program number can be changed on this screen.
• Program mode screen
Makes the respective settings for measurement.
• Environment setting screen
Makes the basic settings to operate the LT-9001,
such as the communication parameters.
• Measurement screen
Displays the distance change from one reference
point to another (displacement) as a measured
value. The displacement change in time shifts is
also displayed as a trend graph.
• Light intensity screen
Displays the measured value and the peak of
reflective light from a target in a bar graph. When
there are multiple peaks of reflective light intensity,
the four highest values are displayed.
• Pause screen
Stops the update of a trend graph and measures
the displacement at any position.