KEYENCE LT-9001 Series - Manual (Page 126)

I/O
Terminal
7
Chapter
E LT-9001-IM
7-12
Timing Chart
How to output the light intensity waveform in binary data
• Either the profile data or light intensity data can be selected by the BIN SEL input.
• The BIN SEL input is received just before the waveform is output.
• The intensity light data of the profile data that has just been output is output.
• You cannot output both the profile data and the light intensity data for all of the waveform. In the example of
above figure, the waveform 3 and waveform 5 cannot be output.
• During the profile waveform is output from the RS-232C interface, the data for analog output or binary
output are not updated.