KEYENCE LT-9001 Series - Manual (Page 29)

2
Chapter
Basic
Operations
E LT-9001-IM
The procedure used to select or to enter items/values
such as parameters is explained as follows.
1 Place the cursor on the item you want to set
by using the [
▲], [▼], [t] and [s] buttons.
2
Press the [ENTER] button.
The item on which the cursor was placed at step
1 is selected.
3 Repeat step 1 and 2 to change the selected
item or the parameter.
When you want to cancel the operation
If you press the [ESCAPE] button on the remote
control console, the cursor moves to the item
selected immediately before.
Selecting an Item
2-11
The procedure used to enter a value such as the
tolerance is explained as follows.
1 Select the item whose value is to be entered.
2 Specify the digit of the entering value with the
[t] and [s] buttons.
3 Specify the value that you want to enter with
the [
▲] and [▼] buttons.
4 Press the [ENTER] button after changing the
value.
The specified value is fixed.
When you want to cancel the changed value
Press the [ESCAPE] button before pressing the
[ENTER] button in step 3 above.
If the [ZERO] button is pressed while changing the
value, the value can be set to zero.
Reference
Entering a Value