KEYENCE LT-9001 Series - Manual (Page 16)

Before
Use
1
Chapter
E LT-9001-IM
1-6
Identifying Part Names and Functions
1 [ENTER] button
Select the items by tilting the [ENTER] button up, down, right or left.
Fix the selected item by pressing the button straight down.
Refer to "How to Use the [ENTER] button" (page 2-10).
2
[PROG/RUN] switch
Switch the run/program modes by sliding down the switch. Each sliding
movement switches the modes.
3 [HOLD] button
Press the [HOLD] button to retain the measured value. This button has the
same function with the TIMING input terminal on the back of the controller.
Refer to "Hold Function" (page 5-3).
4
[ESCAPE] button
Press the [ESCAPE] button to return to the previous display or operation during
settings.
Press this button to exit or abort the setting item. This button has the same
function with the RESET input terminal on the back of the controller in the run
mode.
5 [PROGRAM No.] button
Press the [PROGRAM No.] button to switch the display to the program No.
selection screen.
6 [PAUSE] button
Press the [PAUSE] button to stop updating the graph display while in the
measurement screen, and to switch to the pause screen.
7
[SCREEN] button
During measurement: Press the [SCREEN] button to switch the measurement
screen to the light intensity screen.
During setting: Press the [SCREEN] button to switch the selection status.
8 [ZERO] button
Press the [ZERO] button to use the Auto-zero function. This button has the
same function with the ZERO input terminal on the back of the controller.
Refer to "Auto-zero Function" (page 5-4).
Remote Control Console
2
3
5
6
4
1
8
7