KEYENCE LT-9001 Series - Manual (Page 70)

4-4
Identifying Part Names and Functions of Screens
This section identifies the part names and describes the functions of the
light intensity screen.
1. Display of measured value
Displays a measured value. You can select single or double display of
OUT1/OUT2.
When you select single display, the judgment is displayed.
2. Mode display
Displays the program number (P 0 to 7), profile/displacement mode, and
run/program mode
3. Menu display
Displays the respective menus.
4. Area settings display
Displays the area range and how the point data in an area is calculated (such as
maximum value, minimum value, and average).
5. Light intensity graph display
Displays the light intensity of the respective point data within a scanning range.
6. Area settings display bar
Displays the range of Area 1 and Area 2.
7. Profile waveform graph display
Displays the shape of the target.
8. Range of light intensity graph
The light intensity graph is displayed in this area. The upper and lower limits are
set from 0 to 255.
9. Range of profile graph
The profile graph is displayed in this area. The upper and lower limits are the
same as in the measurement range of the measuring unit.
10. Light intensity level display
Displays the light intensity level.
11. Dark setting display bar
When you set the dark status, the setting range is displayed in a gray bar.
Light Intensity Screen
E LT-9001-IM
Operations
and
Fun
ction
Settings
in
the
Profile
Mode
4
Chapter