Resetting the device to thefactory settings, Resetting the device to the factory settings – KEYENCE LT-9001 Series User Manual
Page 40
Advertising
2-22
Resetting the Device to the
Factory Settings
It is possible to delete all setting contents and
change to the LT-9001 default values set at the
factory.
To reset the device to the factory settings, follow
the procedure below.
1
Turn off the power switch of the controller.
2
Turn on the power switch of the controller
while holding down the [ZERO] button on the
console.
3
Select [OK] by using the [t] and [s] buttons
and press the [ENTER] button.
Initialization is executed.
The interface language and the coefficients set in the
environment settings are not initialized.
Reference
E LT-9001-IM
Basic
Operations
2
Chapter
Advertising