KEYENCE LT-9001 Series - Manual (Page 124)

I/O
Terminal
7
Chapter
E LT-9001-IM
Timing Chart
7-10
Binary output
• OUT1 and OUT2 are updated asynchronously depending on the number of measurement times for
averaging or the options specified in the measurement mode.
• Output contents of either OUT1 or OUT2 can be selected for binary output by using "BIN SEL input".
• You can check whether the current binary output is OUT1 or OUT2 by checking "BIN OUT output".
• OUT STB output is always output in a OUT STB cycle (T1).
• Synchronize the binary data with the OUT STB signal to import.
• The OUT STB cycle (minimum input time) (T1) and update cycle (T5) vary according to the settings.
Refer to "Timing Details" (page 7-13) for details.